How To Repair Wood Door Hole

Download Commodity

Download Article

Hollow cadre doors are much cheaper and more mutual than doors made of solid wood, but they are also a lot more fragile and prone to damage. While holes in your doors or unsightly scratches might seem hard to repair, y'all tin get them stock-still up in no more a twenty-four hour period or two. But patch up holes or make full in the scratches before refinishing the surface and your door will wait proficient as new in no time!

1. 1

   Cut away whatsoever loose or broken woods from around the hole or crack. Depending on how the door was damaged, there may be some loose splinters or fragments effectually the edges of the hole or crack. Rather than trying to repair these, use a utility knife to cutting abroad any damaged wood until you lot're left with a clean hole gratis from crude edges.^[1]

   • Ever cutting away from yourself when working with a utility pocketknife, especially when cut through something sturdy similar wood.
   • You may need to make the hole or crack bigger earlier you tin begin repairing information technology. It'southward much easier to repair a larger pigsty free from damaged wood than it is to repair a smaller one that'south fragmented or cleaved.

2. 2

   Pack the hole with paper towels. While the paper towels won't make the door stronger or repair it, they are an piece of cake and affordable way to agree the insulation foam in place while it dries. Bunch upwardly a few paper towels and stuff them around the lesser and sides of the hole or fissure you want to repair.^[ii]

   • Paper towels work as they are light plenty to agree their own weight within the door. If you don't have paper towels, apply some tissue paper or something similarly low-cal.

   Advertisement

3. 3

   Fill the pigsty with expanding foam insulation. Expanding insulation foam comes in a spray tin with a long nozzle on the top. Indicate the nozzle into the hole or crack in your door and begin spraying. The foam volition expand to fill the space within the door, with any excess expanding outside the hole through the face up of the door.^[3]

   • Expanding insulation foam should exist available online or from your local hardware store. For a smaller infinite, a low-expansion type may be easier to handle.

4. 4

   Leave the insulation foam to dry overnight. One time the insulation foam has filled in the hole or crevice, it needs to dry all the way through before it tin can be cut or sanded down. Leave the foam to sit for 4 to 5 hours or ideally overnight then that it tin can dry completely.^[iv]

   • Check the instructions on your own brand of insulation foam for more guidance on how long it volition have to dry.

5. 5

   Trim away the excess foam with a utility knife. Position a utility knife slightly in a higher place any protruding insulation cream and so that it is affluent with the face of the door. Run the knife downward the face of the door to cut away whatsoever excess cream, trimming it until the cream sits no more than 0.ane inches (two.5 mm) below the face of the door.^[5]

6. vi

   Apply a layer of auto-trunk filler for a strong repair. Mix together 2 parts of an automobile-body filler and 1 part of a hardener catalyst and spread the mixture over the hole in your door. Use the border of a putty knife to smear and printing the mixture over the hole, filling in any gaps and making it roughly flush with the door.^[6]

   • Machine-trunk filler is a compound that volition give you a very potent door, but it can exist quite difficult to piece of work with. It will normally come packaged with a hardener catalyst designed specifically to activate it. This production is available online or at your local hardware or auto shop.

7. 7

   Cover the hole with spackle for a quicker fix. ^[7] If you don't have auto-trunk filler, y'all can use spackle instead. Employ a putty knife to scoop out some spackle and spread information technology over the hole in your door. Work in long, smooth strokes to smear the spackle over the door as smoothly and evenly as possible.^[8]

   • Spackle is readily bachelor, affordable, and very easy to work with.
   • Spackle is available online or from your local hardware store.

8. 8

   Look one hour for the surface to dry. Whether yous repaired the door with spackle or an machine-trunk filler chemical compound, it will have around one 60 minutes for your repair chemical compound to dry completely. Exit the door to dry out until information technology is difficult to the bear upon.^[9]

   • Check the instructions on your spackle or auto-body filler compound for more information on how long it will take to dry.

9. ix

   Sand down the surface of the door. ^[x] Employ a sheet of coarse dust sandpaper, around 100- to 120-grit, to begin sanding downwardly your repair chemical compound. Sand off the spackle or auto-trunk filter until information technology is level with the surface of the door and it looks flat.^[11]

   • Sanding downwardly the door will help y'all smoothen out the repair job to make it less visible. Even so, information technology volition crude up the surface around the hole or crack. To fix this and make the door look completely undamaged, paint or stain the door.^[12]

   Advertizing

1. 1

   Utilise very fine grit sandpaper to remove loose splinters and paint. Use 320-grit sandpaper to sand down any areas where the paint is peeling and/or the wood is splintering. Clean up the scratched expanse so that you can patch it rather than piecing it back together.^[13]

   • If the forest is significantly splintered, wear heavy gloves while sanding to avoid injuring yourself.

2. 2

   Apply a generous glaze of wood filler to the scratched expanse. Squeeze or spread a small dollop of wood filler over each scratch on your door. Use your finger or a putty knife to spread the filler around and press information technology into the scratches. Effort to achieve a smooth finish that is even and level with the rest of the door.^[fourteen]

   • Wood filler is bachelor online or from your local hardware store. It will either come up premixed in a tube or in 2 separate parts that need to be combined before using it. Follow the instructions on your wood filler for the best results.

3. 3

   Leave the filler to dry for 15 to 20 minutes. The filler needs to set upwards and fully adhere to the wood in order for it to repair the door. Once you take pressed filler into all of the scratches, leave it for 15 to xx minutes to dry fully, until it is completely solid to the touch.^[fifteen]

   • Check the instructions on your wood filler for more information on expected drying times.

4. 4

   Sand downwards the forest filler with 320-dust sandpaper. Once the filler has dried, use very fine grit sandpaper to sand down previously scratched area. Work in shine, deliberate strokes to remove any excess wood filler and flatten the surface of the door.^[sixteen]

   • Painting over the sanded area will brand any irregular bumps more than obvious. Run your hand over the area yous patched with wood filler to catch any areas that need more sanding and smoothing.

5. v

   Make clean the area with a damp paper towel or sponge. Sanding the wood and paint around the scratched surface area can produce a pregnant corporeality of dust and debris that tin can ruin the look of the repaired door. Dampen a clean textile or a newspaper towel and lightly wipe downwardly the surface area to make clean upward whatever grit left backside.

   Advertisement

1. 1

   Sand down the area you repaired and wipe away the dust. To make sure the pigment or wood stain sticks evenly to the area y'all are painting or staining, use 220-grit sandpaper to sand downwardly the repaired expanse. Use a vacuum cleaner or a damp textile to wipe abroad whatever dust or debris.^[17]

   • Dust will forestall the paint from sticking to the door properly, leaving an uneven surface. Clean away whatsoever grit before refinishing the door.

2. two

   Remove whatever hardware or hinges from the door. It's all-time to paint or stain the unabridged door to achieve an even terminate, rather than only painting or staining the area you lot repaired. Use a screwdriver to remove the hardware from the door. You might need to remove the doorknob, hinges, or a strike plate nigh the base of the door.^[18]

   • If you desire to remove the door from its hinges entirely, press a nail against the base of each hinge pivot and use a hammer to pop out the pins. This will let you refinish the door elsewhere and brand the job easier.
   • Check the screws in each fitting or fixture to choose the right screwdriver to use. You should always remove and reattach fixtures to a hollow core door with a screwdriver, equally an electric drill can easily harm the door.
   • Alternatively, y'all could use painter's tape to tape off areas you don't want to paint over.

3. 3

   Find paint or forest stain that matches the color of your door. Choosing the right color of pigment or wood stain will brand sure that the repaired door matches the remainder of the doors in your home. Ask an employee at your local hardware store for some pigment or wood stain samples or enquire for help in choosing the right paint to match the colour of your door.^[19]

   • While taking a picture of your door to help match the color might seem like a skillful thought, it won't ever lead to a directly match. The lighting in your abode, the type of photographic camera used, and the way the movie is printed or displayed will all alter the colour.
   • If y'all tin, bring in a sample of the door to assistance match it — such as a piece of the door you cutting away when first repairing it.

4. four

   Use an even glaze of paint or wood stain to the entire door. Use a broad, all-purpose paintbrush or a paint roller to utilise a unmarried coat of paint or woods stain to the door. Paint or stain any grooves or panels first, then paint long, fifty-fifty strokes over the rest of the door to avoid leaving visible lines.^[20]

   • If you're worried about making a mess, lay downwardly a drop cloth or some old newspaper underneath the door before you begin painting.

5. 5

   Leave the door to dry for 3 to 4 hours. Once you've applied the first coat, allow the door to dry for 3 to four hours. Even slight contact with the door can impairment the finished look, then make sure everyone who might come up in contact with it knows that it is nonetheless wet.^[21]

   • Check the instructions on your chosen paint or stain for more information on the expected time it takes for it to dry.

6. 6

   Apply a 2nd coat of paint or wood stain and allow information technology dry. Each coat that you apply to the door volition darken the colour slightly and improve the look overall. One time the first coat has dried, utilize a 2d coat to help obscure any imperfections visible from the first coat. Leave information technology to dry fully until the door is no longer damp or tacky to the touch on.^[22]

   • Many interior paints and stains will take several days to cure completely. Be careful with your repaired door for 1 week subsequently painting it to avoid damaging your coat of paint.
   • You can apply equally many coats of paint or stain as you want, but 2 or 3 coats will usually exist enough to brand your door expect fantastic.

   Advertisement

Add New Question

• Question

  Should I ready my door or supercede it?

  

  Barry Zakar is a professional handyman and the founder of Trivial Red Truck Domicile Services based in the San Francisco Bay Area. With over 10 years of experience, Barry specializes in a diversity of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.

  

  

  Support wikiHow by unlocking this expert respond.

  Most hollow core doors are fairly inexpensive and esasy to replace. If the pigsty in your door is large, just get ahead and replace the door. Nonetheless, for a minor hole, you may be able to patch it with spackle, and then sand and repaint it to match.

• Question

  Can you patch a hollow core door?

  

  Barry Zakar is a professional handyman and the founder of Niggling Scarlet Truck Home Services based in the San Francisco Bay Area. With over ten years of experience, Barry specializes in a diversity of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry also holds his MBA from John F. Kennedy University.

  

Ask a Question

200 characters left

Include your e-mail address to become a message when this question is answered.

Submit

Advertisement

• If the hole in your door is fairly big, it may be more effective to just supersede the entire door.^[23]

Advertising

Video

Things You'll Need

• Utility knife
• Paper towels
• Expanding insulation foam
• Machine-trunk filler or spackle
• Putty knife
• 120-dust sandpaper
• 320-grit sandpaper

• 320-grit sandpaper
• Forest filler
• Putty knife
• Clammy cloth or paper towels

• 220-grit sandpaper
• Pigment or wood stain
• Broad, all-purpose paintbrush or paint roller

Nearly This Article

Article Summary Ten

To repair a damaged hollow core door, commencement by cutting abroad any loose or broken wood effectually the damage using a utility knife. And so, pack the hole or crack with paper towels, and fill information technology in with expanding foam insulation. Adjacent, let the insulation dry completely before trimming away the excess with a knife. Finally, cover the area with spackle, and let information technology dry out before sanding it down so it's flush with the balance of the door. To learn how to refinish a hollow core door, scroll downward!

Did this summary assist you?

Thanks to all authors for creating a page that has been read 779,732 times.

Did this article aid you lot?

Source: https://www.wikihow.com/Repair-a-Damaged-Hollow-Core-Door

Posted by: mullinspriont.blogspot.com

Share this post