When a fridge door warps, it no longer volition close properly. This tin can cause energy to be wasted. It can also cause excessive condensation to build upwardly on the walls and shelves inside of the refrigerator. The door is held rigid with a metal retaining strip that is located under the door gasket. Fixing a warped door on a fridge requires the apply of a nut driver sized to the nuts that are used in your particular make and model.

Open up the refrigerator door and locate the gasket that is installed around the perimeter of the door.

Elevator up the flange part of the gasket starting at the outside corner and loosen the screws that secure the metal retaining strip. Use the proper size nut driver for the screws used in your brand and model of refrigerator. Do non remove the screws, just loosen them. Work your way effectually the unabridged gasket and loosen the screws holding on the retaining strip.

  • When a refrigerator door warps, information technology no longer will close properly.
  • Work your fashion around the unabridged gasket and loosen the screws holding on the retaining strip.

Grasp the superlative of the door with one hand and the lesser with the other hand. Twist the door firmly. Shut the door and check it for a proper fit. It may require twisting the door several times and checking it subsequently each time before it is correct.

Tighten the screws on the retaining strip using the nut driver. Start at the exterior corner and piece of work your way around the door to ensure that you lot tighten every spiral.